120G CXP to 3x 40G QSFP+ Active Optical Cable

Description
CXP to 3xQSFP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 120G Ethernet, fiber channel and PCIe. It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface and QSFP-interface. 

128GFC QSFP28 Optical Transceiver Module (FTQ2-HG-SR4-OTU4)

Description
The F-tone Networks FTQ2-HG-SR4-OTU4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 SR4 for 128G Fiber Channel and OTU4 Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.

200G QSFPDD LR8 Optical Transceiver Module

Description
The F-tone Networks FTQD-2H-LR8xx is an Eight-Channel, Pluggable, Fiber-Optic QSFP DD LR8 for 2×100 Gigabit Ethernet Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208Gbps bandwidth. 

200Gb/s QSFP DD PSM8 2km Optical Transceiver

Description
The F-tone Networks Technologies FTQD-2H-PSMIR4xx is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. 

200GBASE-DR4 QSFP56 Optical Transceiver Module

Description
F-tone Networks’s FTQ5-2H-DR4xx 200GE QSFP56 Optical Transceiver modules are designed for using in 200 Gigabit Ethernet links over single-mode fiber. They are compliant with the QSFP MSA and with IEEE 802.3bs 200GBASE-DR4 specification. 

200GBASE-FR4 QSFP56 Optical Transceiver Module

Description
F-tone Networks’s FTQ5-2H-FR4xx 200GE QSFP56 Optical Transceiver modules are designed for use in 200 Gigabit Ethernet links over SMF28 single-mode fiber. They are compliant with the QSFP MSA and with IEEE 802.3bs 200GBASE-FR4 specification. 

200GBASE-SR4 QSFP56 Active Optical Cable

Description
F-tone Networks’s FTQ5-2H-SR4-Q5-Oxxx 200GE QSFP56 Optical Transceiver modules are designed for use in 200 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber. They are compliant with the QSFP MSA and with IEEE 802.3cd 200GBASE-SR4 specification.

200GBASE-SR4 QSFP56 Optical Transceiver Module

Description
F-tone Networks’s FTQ5-2H-SR4xx 200GE QSFP56 Optical Transceiver modules are designed for use in 200 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber. They are compliant with the QSFP MSA and with IEEE 802.3cd 200GBASE-SR4 specification. 

200GbE to 2x100GbE (QSFP56 to 2xQSFP56) MMF Active Optical Splitter Cable

Description
F-tone Networks’s FTQ5-2H-2Q5-Oxxx MMF Active Optical Splitter Cable is used in 200 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 200GbE connector on one side and two separate 100GbE connectors on the other two sides. 

25G SFP28 20km Dual CWDM Transceivers With APD

DESCRIPTION
The Transceiver is intended for 20km reach service from 24.33Gb/s to 25.78Gb/s CWDM C35~C37 single mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential.

25G SFP28-DWDM 2Km (FTCS-Dxx25G-02Dxx)

Description
This product is a 25G SFP28 DWDM transceiver designed for optical communication compliant with 25G standard. Its high performance cooled DWDM EML transmitter and high sensitivity PIN receiver provide superior performance for 25G application up to 2km Links.

25Gbps 1310nm SFP28 Transceiver for liquid cooling

Description
The F-tone Networks FTCS-25G-LR-2XX-xxx is a single-Channel, Pluggable, Fiber-Optic SFP28 for 25 Gigabit Ethernet and CPRI Option 10 Applications, it’s specially reliable design to enable liquid immersion environment. It is a high performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 10km.

25Gbps 1310nm SFP28 Transceiver(FTCS-1325G-10D)

Description
The F-tone Networks FTCS-1325G-10D is a single-Channel, Pluggable, Fiber-Optic SFP28 for 25 Gigabit Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 10km. 

25Gbps 1310nm SFP28 液冷光？

产品形貌
F-tone Networks FTCS-25G-LR-2XX-xxx是一款单通道可插拔光纤SFP28，适用于25千兆以太网和CPRI Option 10应用，它的设计特殊可靠，可实现液体浸没情形。它是一款高性能？，适用于10公里以内的25.78125 Gbps短程数据通讯和互连应用。

25Gbps 850nm Multimode SFP28 Active Optical Cable(FTCS-25G-CS-Oxxx)

Description
F-tone Networks SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP28 connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.

25Gbps 850nm SFP28 Optical Transceiver for liquid cooling

25Gbps LAN-WDM SFP28 I-Temp Transceiver

Description
This product is a high-performance SFP28 transceiver module designed for optical communication, which is both compliant with IEEE 25GBASE-ER and CPRI option 10 standards. Its high performance cooled EML transmitter and high sensitivity APD receiver can provide superior performance for 25G application up to 30km/40km(with FEC) Links.

25Gbps SFP28 Bi-Directional Transceiver,10Km

Description
The F-tone Networks FTCS-B2725G-10Dxx is designed for Bi-directional 25G serial optical data coummunications by using 1270nm transmitter and 1330nm receiver. It is a high performance module for 25G Ethernet and Option 10 CPRI applications which operate up to 10km.

25Gbps SFP28 Bi-Directional Transceiver,40km

Description
The F-tone Networks FTCS-B2725G-40DI is designed for Bi-directional 25G serial optical data communications by using 1270nm transmitter and 1330nm receiver. It is a high performance module for 25G Ethernet and Option 10 CPRI applications which operate up to 40km.